Step 1:
Download the Peace by Hampton App.
Open the camera case. Install a Micro-SD card (not required but needed for local playback) and rechargeable batteries. Now you are ready to connect your camera using the Peace By Hampton app.
Step 2:
Use a 3/16"drill bit to drill a hole approximately 1" deep at mounting location. Install the anchor and screw. Install the base over the screw head and slide down.
Step 3:
Mount the camera to the base and adjust to the appropriate angle.
NOTE: Use Micro USB port to charge the batteries or to power the camera before/during set up.
Micro SD Card NOT included.