When you are ready to set up your new WiFi Camera, the Peace By Hampton app will guide you through the setup process. However, here are some step-by-step instructions for you to refer to. If you have already downloaded the Peace by Hampton app and created an account, skip to Step 3.
- Download the Peace by Hampton app from the Play Store or App Store on your smart device.
- Create a Peace by Hampton account by opening the app and clicking "Register."
- Install the Micro-SD card and connect the power supply. Using the pin key, press the reset button until you hear the prompt from the camera speaker.
- From the 'Home' page in the app, click on the "+" in the top right-hand corner of the page.
- Click on 'Indoor Camera.'
- Verify your WiFi Network information is correct.
- Check Scan QR Code in the app and click next.
- A QR code should appear on your smart device, hold the screen 4-8 inches from the camera.
- You should hear a toned prompt confirming that the camera successfully scanned the code, click "I Heard a Prompt".
- Click done in the top right.
- Place or install your camera where you wish.
Note: Your camera must be plugged in to operate.